UK Exquisite Harry Winston Histoire De Tourbillon 8 Replica Watches Review

Just when we gambled that Harry Winston might not be able to outdo its mind-boggling Histoire de Tourbillon 7 released last year, the renowned jeweler has just announced the Histoire de Tourbillon 8 – the latest in an ongoing series of tourbillon watches whose degree of complication and unconventional design seems to grow exponentially with each new addition. However, while each new entry had somehow managed to up the ante, the HDT 8 seems to recycle the bi-axial tourbillon complication of its predecessor, while now offering up a new time display with jumping hours and minutes, and some other aesthetic tweaks. It’s far less of a radical update to the HDT series than we’re used to seeing but remains impressive for the same reasons.

Now, before we get too deep into the inner workings of the Histoire de Tourbillon 8, it’s worth pointing out the obvious that white gold case replica Harry Winston might be more associated with jewelry than ultra high-end watchmaking in the minds of many. To be fair, the man (and more recently, the brand) has historically spent more time in the headlines as the jeweler of choice for the Hollywood elite, as well as former or current owner of some of the world’s most famous gemstones. The latter includes the 726-carat uncut rough diamond named “Jonker” in the mid-1930s, then the Hope Diamond in 1949, and more recently, the flawless 101.73-carat Winston Legacy. Within that timeline, Winston began selling watches in the late 1980s, but things really didn’t start to ramp up in complication until the brand opened its own manufactory in Geneva in 2007, and subsequently began producing the impressive high-complication series like the Histoire de Tourbillon, which we’re more than happy to gawk at today.

And speaking of gawking, there’s more than an eyeful to go around with the complicated movement replica Harry Winston Histoire de Tourbillon 8 as you take in the twin bi-axial tourbillons. Now, as mentioned, this is the same complication that punctuated the previous HDT entry, but it’s back with a twist. In place of the traditional two-handed time display at the 3:00 side of the dial, we have a pair of rotating discs – hours at 1:00, and minutes at 4:00, which “jump” as each hour and minute clicks by.

But the real story here, as it was with the HDT 7, is the twin tourbillons. Granted, little has changed since we last saw them – but the execution is still mind-bendingly complex, and a treat to behold, particularly when juxtaposed against a less traditional timekeeping display – an aesthetic that seems to more neatly fit the overall nü-industrial vibe of the watch. To the left of the time display dance the tourbillons – each of which completes a rotation on a 30-degree inclined axis. Nestled between that rotational movement, a second cage turns on its own axis, completing a rotation every 45 seconds. Within the latter, the balance wheel maintains a steady tempo of 21,600vph, throughout the watch’s power reserve of around 55 hours (indicated by the cone at 6:00).

The whole concept behind a tourbillon itself is to minimize gravity’s influence on the balance wheel, by actively subjecting it to the widest variety of movement positions possible. By putting the tourbillon on a second axis, and then doubling the complication itself, the balance wheel is placed within an exponentially greater number of positions, thereby theoretically yielding an even higher level of chronometric performance.

What makes the wizardry of the black leather strap fake Harry Winston Histoire de Tourbillon 8 so interesting, though, is not just that we have two independently operating tourbillons, both operating on two axes each, but that their mechanical operation results in a single time measurement. To ensure the accuracy of this single measurement, the HDT 8 employs a spherical differential, which maintains an average between the two – an average which is displayed in the form of the time to the right of the dial.

The case of the HDT 8 itself is made of white gold, the rotating time discs from aluminum, and the tourbillon cages and movement bridges from titanium. Dimension-wise, the delicate fake Harry Winston Histoire de Tourbillon 8 carries its case sizing over from the HDT 7, which is by no means small: 51mm by 17mm. But bear in mind that the calibre HW4503 that houses the twin tourbillons (each of which contains 117 components alone) is 43mm on its own. Large? Yes, but at least there’s a justifiably large amount to look at here, even if it’s a far cry from being legible. In addition to the tourbillons dancing the hours away, the dial itself is a sight to behold – comprised of a single component with 13 different textured elements. Each of these textures is executed through a different finishing technique – from sanded, grained, and satin textures, to the complex honeycomb and engraved script pattern at 12:00.

UK Delicate IWC Portugieser Chronograph Classic Replica Watches With Calibre 89361 Movement

IWC replica has released an updated successor for the fake IWC Portugieser Chronograph Classic, a watch well-known for its unique chronograph totalizer display, in-house movement, and sporty yet elegant design. The new reference 3903 replaces the reference 3904, with several subtle design changes and updates which help improve the overall aesthetic of the watch.

The Portugieser line (formerly called Portuguese) was considered to be large-sized watches when launched in the 1930s. However, at 42mm, the new black leather strap replica IWC Portugieser Chronograph Classic is about the median by today’s standards. Offered in either stainless steel or rose gold, the case is elegant with a touch of sportiness thanks to the broad, double-stepped case and round chronograph pushers. In addition, the watch is also available in two dial colors: silver and blue. Both dial colors are available in the stainless steel option but the rose-gold is only offered with a silver dial. While all three options work well, my personal favorite is the stainless steel with silver dial and the heat-blued hands.

 

The highlight of the watch is the in-house chronograph movement with chronograph hours and minutes displayed at 12 o’clock and including a flyback function. The caliber 89361 is part of the 89000 family of IWC movements, some of which are found in halo offerings such as the fake IWC Ingenieur Perpetual Calendar Digital Date-Month. The calibre 89361 is manufactured in-house, offers a 68-hour power reserve, and can be seen in all its Geneva-striped glory through the display caseback. The skeletonized and decorated rotor also helps reveal as much of the chronograph mechanism as possible for the owner’s viewing pleasure.

On the dial side, we have a two-register layout with running seconds at 6 o’clock and, unique to this movement, a combined totalizer for chronograph hours and minutes at 12 o’clock. The familiar way of displaying the hours and minutes makes reading the elapsed chronograph time easier and more intuitive. In the images here, for example, the elapsed time would be 10 hours, 9 minutes, and 23 seconds. The dial of this gold case fake IWC is completed by a railway track chapter ring, date window, applied Arabic numeral indexes, and elegant minute and hour leaf-shaped hands.

The color of the indexes and hands differ and are designed to contrast with the dial color. The stainless-steel with silver dial has blue indexes with heat-blued steel hands, while the blue dial has polished steel hands with silver indexes. The rose-gold watch, of course, has gold hands and indexes. This is the most noticeable change from the predecessor which had silver indexes and hour and minute hands on a silver dial. This change is definitely an improvement and enhances the aesthetics and, more importantly, the legibility of the dial.

While the blue steel pointer replica IWC Portugieser Chronograph Classic ships with an alligator leather strap, black for stainless steel variants and brown for rose-gold, it is likely to also pair well with more casual straps making it a versatile daily wearer that plays well with both formal and more casual attire.

White Pointer UK Replica Seiko Prospex Blue Lagoon Samurai SRPB09 Limited Edition Watches Review

Earlier this year, Seiko replica introduced two “limited edition” watches to their Prospex line, the Blue Lagoon SRPB11 “Turtle” and SRPB09 “Samurai.” The new Turtle is similar to the SRP777 we reviewed here but it is the SRPB09 Samurai that grabbed my attention. The original fake Seiko Samurai watch was introduced in 2004, only to be discontinued a few years later. One of the less common “nicknamed” Seikos, I was thrilled to see that the Samurai was making a comeback (in blue, nonetheless). It’s funny, but when I got this watch I wasn’t actively looking at watches to buy, much less divers.

Oddly, perhaps, I always seem to inadvertently have a blue Seiko dive watch in my rotation. I had a Seiko SNZH53 to quench that thirst and while that is a great value watch, it lacked some refinement in the design and finish, and so was slowly falling out of my usual rotation. When I saw the blue dial fake Seiko Prospex Blue Lagoon Samurai SRPB09 and finally came across one for sale, the design, famed Prospex quality, and reasonably affordable price point worked in tandem to push me over the edge.

The original Samurai (SBDA003) was produced from 2004-2008 and the watch’s moniker was derived from its handset which resembled a Samurai’s sword. Though this handset has been replaced in the SRPB09, the angular lines of the case, specifically the unique lugs, have been retained from the original Samurai. This watch combines all the elements that made the Prospex line famous; history, reliability, great value, and a unique case design that I’ve always loved and admired. Though I also quite like the Turtle cushion case, for me, there’s nothing like this angular classic design.

The stainless steel case clocks in at 43.8mm wide and 13mm thick which is par for the course for Seiko divers. While this is quite large, the watch was designed to be a tool watch and the priority during a dive is legibility of the dial/bezel. You’ll be happy to hear, however, that for the average desk diver like me, the watch wears small and quite comfortably, thanks to the short, slanted lugs. My wrist is 7″ around, which should give you an idea of how the watch would wear.

The bezel is anodized aluminum and 120-click, unidirectional with excellent grip. While I am not a diver, I do live in the cold (and landlocked) Midwestern United States and the bezel had plenty of grip even with a couple of layers of gloves on. I’m also happy to report that the bezel pip lines up nicely with the middle of the 12’o clock marker, something my SNZH53 Seiko 5 just couldn’t seem to do. The crystal is flat Hardlex and the watch has a solid steel Tsunami caseback, with a “LIMITED EDITION” engraving. Besides the angular lugs, the other notable features on the luminous scale replica Seiko Prospex Blue Lagoon Samurai SRPB09 are the screw-down crown and the drilled lugs. The drilled lugs are a blessing for someone prone to frequent strap changes, and the screw-down crown is well proportioned with a texture that helps add visual interest and improve grip, and the crown guards ensure the overall design remains coherent. While neither drilled lugs or a screw-down crown are rare or unique to the wonderful replica Seiko, they serve as good examples of how this watch marries form and function.

The highlight of this brown leather strap fake Seiko Prospex Blue Lagoon Samurai SRPB09 watch is, of course, the color scheme. The bezel is two shades, with the first 15 minutes in a turquoise blue while the rest of it is a more familiar deep blue that we’ve seen in several other Seiko offerings. The dial is similar to the dark blue of the bezel but has a semi-glossy finish that makes it wonderfully multi-faceted – so much so that I spent several minutes in the sunlight enjoying the interaction between the light and the dial. Head-on or in shade, the dial looks matte but there is a sunburst quality to it when light strikes it from an angle.

The replica Seiko Prospex Blue Lagoon Samurai SRPB09 has only a date window, leaving out the day of the week. No complaints from me as I’m someone who prefers to have no day/date window at all if given the choice, but it’s at least not as distracting to the dial’s symmetry. The hands for this delicate fake Seiko Prospex Blue Lagoon Samurai SRPB09 are very similar if not the same as those on the Seiko Monster line, which are super legible and do the job very well, not leaving much to be desired. The lume, which is Seiko’s proprietary LumiBrite compound, is one of the best I’ve seen. I wouldn’t be surprised if the watch could ruin your circadian rhythm while sitting on your bedside. It also fades in an almost linear fashion and keeps the dial legible for plenty of time. I had no trouble checking the time even at the end of a two-and-a-half-hour movie.

White Dial Replica Omega Seamaster Edizione Venezia Watches Recommend To You

Omega says the idea for the Seamaster’s sea horse logo came when one of fake Omega’s designers visited Venice and saw the gondolas adorned with this fascinating animal – he liked the possible connection with it and the Seamaster and, since 1957, the Seahorse emblem has been associated with this collection.

While self-proclaimed fake Omega historians will certainly know of a few vintage fake Omega Seamasters from the mid-1900s, I don’t think it’s a stretch to say that most replica Omega fans and buyers today think not of a vintage dress watch when they hear the word Seamaster. Yet, this new-for-2017 piece shares numerous design elements with Seamasters of old, reminding everyone that the fake Omega with Caliber 8801 has not always been about chunky, sporty, and colorful. It goes to show that, if you think about it, not only is Omega itself a very versatile and complex brand, but even its collections can be a bit all over the place sometimes.

While you could consider this another 60th-anniversary tribute, I think the new Sedna gold replica Omega Seamaster Edizione Venezia should really just be left alone to be what it actually is: a heavily vintage-inspired, retro-looking dress watch, something that’s been missing from Omega’s stable for some time now. The Globemaster is available in steel but is more modern in its design, even if it is not without its own vintage-tribute details.

The delicate fake Omega Seamaster Edizione Venezia has a domed, silvery, off-white dial with applied indices, Omega logo and text, and a pair of thin, polished leaf-style hands – all of this is in 18k Sedna gold on both model variants. Legibility, because the dials appear to be more satin than shiny, should be alright – it would have been sad to see this piece ruined by the horribly illegible combination of a shiny dial and shiny, skinny hands. Love it or hate it, there is also a subtle date aperture at six, maintaining the symmetry of the dial.

Over the dial is a domed sapphire crystal that should add more depth to the skinny-looking watch – no official figures on thickness but considering the basic functionality of the movement and the small diameter of the case, we’d be surprised if this was a burger. Water resistance is an ample 60 meters or 200 feet, not bad for a gold dress watch and just enough that you never have to worry about it.

Exposed via the laser-engraved sapphire case-back is the fake Omega Caliber 8801, an automatic Co-Axial movement boasting METAS-approved quality control and a resistance to magnetic fields reaching 15,000 gauss. The gold version will come with an 18k Sedna gold balance bridge and oscillating weight. Power reserve is 55 hours which isn’t bad considering the relatively small size of the case and, therefore, movement.

Excellent New UK Raymond Weil Freelancer Calibre RW1212 Replica Watches For You

A good number of Swiss watch brands are owned by conglomerates. There are only a handful of independent brands left and Swiss Raymond Weil is one of them. As most readers will probably know by now, Swatch’s decision to reduce supply of ETA movements to brands outside of the Swatch Group has had a significant impact on the Swiss watch industry. In the past couple of years, many brands outside of the Swatch Group have either scrambled to develop and produce their own movements or have sought out alternative suppliers. For Raymond Weil, one of the things that they did was kind of between those two options by teaming up with movement manufacturer Sellita to design their own movement. And the result of this collaboration is the Calibre RW1212, Raymond Weil’s first in-house-designed movement, produced by Sellita, and the first watch to use this movement is the balck dial fake Raymond Weil Freelancer Calibre RW1212 watch.

Since the in-house developed movement is the highlight of this watch, let’s begin with that. The name RW1212 comes from the postal code of fake Raymond Weil’s address in the Geneva suburb of Grand-Lancy. The movement took the R&D team at Raymond Weil and Sellita 18 months to develop and was developed in part to celebrate the 40th anniversary of Raymond Weil. A distinctive feature of this movement is that it was designed in a way that its escapement could be revealed on the dial side at 6 o’clock. In this way, from the dial side of the watch, the balance wheel, which is also diamond-polished, by the way, almost looks like a tourbillon the way it is mounted with two bridges. Whether that’s a good thing or not, I’ll leave it up to you to decide.

The Calibre RW1212 can also be viewed from the rear via a sapphire crystal display case back. Unfortunately, we don’t have any press photos of the case back, but replica Raymond Weil’s press release says the rotor is adorned with Côtes de Genève and is engraved with the Raymond Weil logo. I suppose it won’t be too shabbily decorated, so expect the usual Côtes de Genève on bridges and perlage on the main plate. Other details that we know now are that the Calibre RW1212 will beat at 4Hz and will offer 38 hours of power reserve.

The new Calibre RW1212 movement will be featured in the stainless steel case Raymond Weil watch. The Freelancer Calibre RW1212 watch comes in a 42mm-wide stainless steel case with either a silver or black dial and paired with either a bracelet or strap. There will also be two-tone variants. Case thickness is a very reasonable 10.6mm. And thanks to the fluted screwed-down crown, water-resistance is a very adequate 100 meters.

The watch that you see here is the stainless steel version with a black dial and steel bracelet. The barrel-shaped hands are made of stainless steel and are filled with Super-LumiNova for better legibility in low-light situations. The highlight of the dial is the opening at 6 o’clock that exposes the escapement. The center of the dial features guilloche, which adds some texture to the dial and prevents it from looking too plain.

All in all, the new fake Raymond Weil Freelancer RW1212 watch is an interesting proposition for anyone in search of an accessible Swiss-made dress watch. The open aperture at 6 o’clock exposing the escapement might not be to everyone’s taste, but it will surely appeal to readers who prefer a bit more action on the dial. In any case, credit must be given to Raymond Weil for pursuing a movement of their own design.

New Wonderful Replica UK Panerai LAB-ID Luminor 1950 Carbotech 3 Days PAM 700 Watches

The use of novel and space-age materials in high-end watches is always fun to follow as a spectator, but it’s far more appreciated when their practical benefits might sometime soon be used in watches that a broader segment can enjoy. That’s rarely the case, but one watch that piqued my interest in this way was the black dial fake Panerai LAB-ID Luminor 1950 Carbotech 3 Days (debuted here). Utilizing an array of carbon composites and low-friction components that run without the need for any kind of liquid lubrication, the result is a watch that guarantees 50 years of service-free operation. There’s no way to know if the guarantee will hold but, limited in production to only 50 pieces, I can’t imagine that 50 Panerai enthusiasts and collectors, aka “Paneristis,” won’t want to engage in this long-term experiment with the brand.

Alongside the Panerai BMG-TECH which also centers around the use of fancy, high-tech materials, the delicate Panerai LAB-ID Luminor 1950 Carbotech 3 Days PAM 700 demonstrates the capabilities of the Laboratorio di Idee (LAB-ID), which operates as Panerai’s R&D department based in Neuchâtel. Like some of Panerai’s previous timepieces (such as this Luminor Submersible 1950), the watch utilizes a material known as Carbotech that serves on both functional and aesthetic levels. While I can’t dispute the use of carbon composites for the sake of their mechanical advantage, I can’t help but notice just how well the deep shaded layers of the Carbotech interact with the minimal blue luminous dial and crystal Panerai incorporated here.

There are four innovations Panerai utilized in developing its caliber P.3001/C, starting with a set of mainplates and bridges constructed entirely out of tantalum-based ceramic, removing the need for any kind of lubrication. This oil-free concept also moves into the DLC-coated silicon escapement, which is second in the list of innovations. Thirdly, with the kind of ceramic and DLC use we see here, luminous scale replica Panerai has eliminated the need for traditional jewels. Therefore, the movement uses a set of just four DLC-coated jewels that remove the need to lubricate the Incabloc shock system. Finally, the two mainspring barrels also operate without any grease or oil and do so with a multi-layer coating and a final layer of DLC.

It’s true that the low-friction, oil-free concept isn’t something new in watchmaking. Back in 2007, Jaeger-LeCoultre released the Extreme LAB followed by the Master Compressor Extreme Lab 2, another watch that could operate without lubrication for its lifetime. The same can be said about a watch like the Cartier ID Two Concept we covered previously. What these pieces didn’t have was the 50-year guarantee, and while the Cartier concept remained a concept, the JLC is designed to grab attention and reflect its “overengineered” attitude both inside and out. This Panerai, however, isn’t really that different-looking from any other watch they make, save for the use of blue and other subtle hints. I like that it’s a watch you can actually ostensibly wear every day for 50 years without feeling self-aware about it – if you have wrists like Sylvester Stallone, that is.

The fake Panerai LAB-ID Luminor 1950 Carbotech 3 Days PAM 700’s case is sized at a substantial 49mm. Much of the larger size is offset by the Carbotech’s characteristic lightweight features. It displays thick layers of the carbon fiber composite and, as I mentioned previously, this creates interesting visual effects with both the luminous blue and deep black tones on the dial. This layered effect even carries on into the crown-protecting device Panerai is known for. The matte finishing is also a nice inclusion to the watch’s stealthy and high-precision look. Additionally, the case boasts 100 meters of water-resistance.

On the dial, excellent Panerai replcia uses carbon nanotubes meant to absorb any trace of light that hits it, resulting in a deep, deep black. The blue Super-LumiNova used throughout the numerals and markers on the “sandwich-style” dial pops against the black tone and is also incorporated into the hands. It almost reminds me of single beams of light piercing through miles of deep oceanic abyss. Overall, I find the dial to be as legible as it gets considering its high contrast and massive size.

The crystal itself has the text “Luminor, Panerai, LAB-ID,” printed directly onto it, and I think this is where some people might find issues with the watch. Because the text is printed onto the crystal itself, it will inevitably get in the way of the hands, which could throw some people off when trying to read the time. Personally, I find that it serves as an interesting solution to the fact that Panerai could not print text on the carbon nanotube dial. Additionally, the crystal features double anti-reflective coating.

Taking a look at the case back, we find the caliber P.3001/C in all its deep, dark glory. One of my favorite features is the power reserve indicator that uses the same blue accents found on the dial. Power reserve is three days and the movement operates at 21,600vph. For convenience while time setting, Panerai fake included a seconds reset function that returns the seconds hand to the 12 o’clock position. It’s a feature that seems to grow increasingly popular and is definitely something I can appreciate.

No surprise here, the strap on the replica Panerai LAB-ID Luminor 1950 Carbotech 3 Days PAM 700 carries the black and blue scheme. The same dark tones found throughout the watch carry on all the way through the buckle and the blue contrast stitching ties together the look.

UK Hublot Big Bang Sang Bleu Replica Watches With Unico HUB1213 Movement Presenting To You

Collaborations and tie-ins are nothing new to Hublot. The brand thrives on them. And as part of the company’s release strategy, wonderful Hublot replica has also created numerous limited-edition watches to commemorate these relationships. For the most part, these limited-edition watches are variations of existing references – new dial colors, new case materials, new straps… that kind of stuff. There’s nothing wrong with that, but I’m sure many readers would prefer to see something a little different and special. It seemed like Hublot has heard our pleas because the limited-edition fake Hublot Big Bang Sang Bleu is one of the more outstanding and unique limited-edition Big Bang watch that I have seen in recent times.

A little background is necessary before I talk about the watch because it is instructive to the design of the fake Hublot Big Bang Sang Bleu. Sang Bleu was founded by Maxime Buchi, a Swiss tattoo artist, entrepreneur, and a watch lover. The company is described as a multimedia platform and creative agency. It consists of Sang Bleu magazine, a publication that focuses on contemporary art and culture; Sang Bleu Physical, a streetwear clothing label; Swiss Typefaces, a type-design studio that specializes in creating logos and corporate typeface; and finally, Sang Bleu Tattoo Studio. If you head over to their site, you see that it’s all edgy, hipster stuff, which is fitting because the Hublot Big Bang Sang Bleu is one of the edgiest takes on the Big Bang design.

It won’t be a stretch to say that the rose gold case replica Hublot Big Bang Sang Bleu is a totally redesigned Big Bang. Available in titanium, titanium with diamonds, King Gold, and Black Ceramic, the case of the Hublot Big Bang Sang Bleu measures 45mm wide, which is standard stuff for Big Bang watches. What is drastically different, however, as you may have already noticed from the photos here, are the case and dial.

Both the case and dial have been designed by Maxime Buchi and it is even more striking in the flesh as compared to the press photos that I have seen. The bezel, for instance, is now cut and beveled and features a hexagonal shape that contrasts greatly against the other Big Bang watches. The top side is satin-finished while the angled, beveled edges are mirror-polished. The facets act as surfaces on which light is reflected, giving this new Hublot Big Bang Sang Bleu case a greater sense of depth. The only design element that seems to have been carried over to the bezel are the signature Hublot H-shaped screws. Water resistance is 100 meters, which as I have mentioned many times before, should be the absolute minimum for a luxury sports watch.

The dial also sees big changes, in place of hands and counters, what you see is a series of octagonal gold-plated discs with symmetrical lines within them, stacked upon each other. The effect of this is quite profound. I’m almost tempted to say that it looks somewhat tribal, but then I realized that the shapes here were inspired by Leonardo Da Vinci’s Vitruvian Man drawing, and I figured the word that I’m actually looking for is probably classical.

There are three discs in total, and if you look closely, you can see that the tips of two are them are coated with white Super-LumiNova. It’s actually quite easy to read the time once you know what you are dealing with: the outer and largest disc indicates the hour, whereas the smaller disc shows the minutes, and the smallest unmarked disc in the middle of the dial spins to indicate the seconds.

To aid owners in reading the time, the dial’s flange indicates the hours and there’s an inner minutes track that aligns with the minutes disc. An interesting detail here is that the numerals on the flange and minutes track are specially created by Swiss Typefaces, which, as mentioned earlier, is the type-design studio arm of Sang Bleu.

The theme of symmetrical lines and geometric shapes continues onto the case middle too with engraved patterns at both lugs. The leather straps, which are made by Italian leather purveyors Schedoni, are not spared too, with embossed patterns that form a very coherent look with the rest of the watch. Taken as a whole, the fake Hublot Big Bang Sang Bleu withUnico HUB1213 movement is easily one of the most special-looking Big Bang watches, and that’s what I like most about it.

Inside, the exquisite replica Hublot Big Bang Sang Bleu is powered by fake Hublot’s Unico HUB1213 movement, which is essentially a Unico movement with the chronograph function removed and the geartrain reworked so as to provide more torque to move the large discs. Power reserve remains unchanged at 72 hours, or three days.

Unique to the movement is the rotor, which continues the polygonal and symmetrical theme of the dial, featuring a silhouette of a triangle, surrounded by other symmetrical shapes and lines. It’s quite neat to see it spin when you give the watch a little shake.

Overall, the black leather strap fake Hublot Big Bang Sang Bleu is easily one of Hublot’s most remarkable and unique limited-edition watches, and hopefully future limited-edition Hublot pieces will use the Sang Bleu as an inspiration and strive to be more than just a simple variation of existing references. In fact, all brands should aspire to the same goals as the Hublot Big Bang Sang Bleu. Limited-edition pieces shouldn’t just be an excuse to sell more watches, they should commemorate the watch for what it is and the Sang Bleu pulls this off successfully. It is easy to see that Maxime Buchi had a large role to play in the design of the Hublot Big Bang Sang Bleu.

UK Wonderful Seiko Prospex Diver Scuba SBEE001 And SBEE002 Giugiaro Design Limited Edition Replica Watches Review

The ongoing partnership between Seiko and Giugiaro Design isn’t slowing down. But today we see not a fresh design but one created with the Italian design company 30-some years ago, the wonderful fake Seiko Prospex Diver Scuba SBEE001 and SBEE002 watches based on models from the 1980s. As many of the Seiko Giugiaro watches have been chronographs, which is fitting as Giugiaro is perhaps best known for its automotive design, dive watches at least offer some welcome variety. And the quirky asymmetrical (G-Shock Frogman-like) design perhaps most associated with the Seiko Giugiaro watches is back again.

The Giugiaro-designed Seiko replica watches are distinctive and recognizable, to say the least, and you can probably spot most of them from across a room. The Giugiaro watches are exercises in design and have included many affordable models like these as well as higher-end watches like the Astron. Only earlier this month, we were surprised by the release of this delicate fake Seiko Astron Giugiaro Design Limited Edition SSE121 GPS watch (which is probably the coolest-looking Seiko Astron I’ve seen). While the Astron also had that offset design of the case in relation to the lugs and strap, the new Seiko Prospex Diver Scuba Giugiaro Design models have more in common with the Seiko x Giugiaro 30th Anniversary Spirit Smart watch – though note that the case is offset in the other direction.

For the SBEE001 and SBEE002 watches Seiko didn’t tone back the ’80s in them at all. The Seiko Prospex Diver Scuba Giugiaro Design limited editions appear to be faithful to the original reference 7C43-7A00 (above) in about every respect. The yellow dial replica Seiko Prospex Diver Scuba Giugiaro Design reference SBEE001 is steel with a blue dial, and the SBEE002 is gold-toned steel with a gold dial. Both have plastic outer cases with a strange bumpy texture which looks rather, well, plasticky in these official images.

Measuring 43.8mm wide, 48mm lug to lug, and 11.2mm thick, on what looks like a somewhat thin silicone strap, the proportions of the offset case are even more pronounced. Over the dial is “curved glass.” While in the Seiko Prospex collection, the dial does not indicate that but it does indicate the case’s 200m water resistance. Inside the black strap fake Seiko Prospex Diver Scuba SBEE001 and SBEE002 Giugiaro Design is the 7N36 quartz movement with an accuracy of -/+ 15 seconds per month that indicates the time, date, and day of the week.

Fantastic UK Roger Dubuis Excalibur Spider Italdesign Edition Replica Watches

The Geneva Motor Show will take place just before Baselworld 2017, and one of the most eagerly anticipated cars at the show will be Italdesign’s new hypercar. Founded by Giorgetto Giugiaro, Italdesign is a design and engineering company with a long history, and this will be their first foray into making a proper car. To commemorate the occasion, Italdesign has also teamed up with delicate Roger Dubuis replica to create the new replica Roger Dubuis Excalibur Spider Italdesign Edition watch.

But before we talk about the watch, here’s a little history about Italdesign. The main thing to know is that Italdesign is responsible for some of the greatest-looking cars in the history of the automobile. For example, Italdesign designed the fantastic-looking Maserati MC12 and the sexy Alfa Romeo Brera. Going further back, they were also the firm behind the DeLorean DMC-12 – surely one of most recognizable cars in the world – and also the first generation Volkswagen Golf and Scirocco. It is an enviable CV of car design.

And now, Italdesign wants to make cars proper. Heading this effort will be a new company called “Italdesign Automobili Speciali” and they will be primarily focused on making extremely limited edition cars. Now, since this is particularly relevant to the watch and an interesting development in itself, let’s talk a bit more about Italdesign’s newest car. At the time of writing, this car doesn’t have a proper name yet, but we do know that it looks absolutely bonkers, and it will be super fast. Thanks to an all carbon fiber chassis and a massive naturally aspirated 5.2-liter V10 engine, the unnamed supercar will be able to hit 60mph in just 3.2 seconds. The car will hit speeds of over 205mph. Only five units will be made.

Now, let’s talk about the watch. The cool fake Roger Dubuis Excalibur Spider Italdesign Edition watch is clearly based on Roger Dubuis’ Excalibur Spider Single Tourbillon watch. That watch is notable because features a highly skeletonized dial that shows off Roger Dubuis’ Geneva Seal-stamped caliber RD505SQ to its fullest.

The stainless steel case replica Roger Dubuis Excalibur Spider Italdesign Edition watch is no different but features a few aesthetic cues that make it stand out. Since Italdesign is based in Italy – and obviously emphasizes its Italianness – the watch features the colors of the Italian flag with red, white, and green accents, as Italdesign has made a signature of their brand. We will note, this also more or less matches the car’s color scheme.

The 45mm-wide multi-layer carbon case, for example, features a white ceramic bezel marked with red liquid ceramic. The DLC-coated titanium crown comes with red vulcanized rubber. On the dial, the flange features red minute markers and even a tiny Italian flag at 11 o’clock. The white gold hour and minute hands also feature red tips filled with white SuperLuminova. And finally, the black rubber strap, for instance, features red, white, and green stitching. It wouldn’t be a stretch to call the Roger Dubuis Excalibur Spider Italdesign Edition watch patriotic!

The highly skeletonized dial leaves nothing to the imagination, as the caliber RD505SQ is exposed in all its glory. There is a large flying tourbillon with a tourbillon carriage in the shape of the Celtic Cross at 7 o’clock, and all plates and bridges are circular-grained and coated with NAC treatment. The caliber RD505SQ is hand-wound and has a single barrel that offers a power reserve of 60 hours.

Certainly, the black strap replica Roger Dubuis Excalibur Spider Italdesign Edition watch is a good match for Italdesign’s new hypercar. Both are Italian and both are produced in extremely limited units. The fake Roger Dubuis Excalibur Spider Italdesign Edition watch will be limited to just 8 pieces, which is curious because Italdesign’s new hypercar is, as I mentioned earlier, limited to 5 units. Wouldn’t it make more sense for the watch to be available in the same number as the car?

Wonderful UK Replica Pocket Watch Inspired Pramzius Trans-Siberian Railroad Watches

Pramzius replica is a new watch brand with the unique mission of bringing the delciate fake Pramzius Trans-Siberian Railroad pocket watch back, but in the form of a wristwatch. Our company has been importing watches from Eastern Europe and Russia for the better part of two decades, with names you know like Vostok-Europe, Sturmanskie and Tsikolia. In late 2015 we decided to launch our own brand drawing from our many years of experience with watches from this part of the world.

Pramzius, which is named for the mythological Baltic Ruler of Time, will use inspirations from one of the eight countries that border the Baltic Sea. For the first edition, we chose for inspiration a Russian railroad pocket watch popular in decades past built by a company that sadly ceased operation in 2007. As a result, we built this first model to be “unapologetically big” at 48 mm in order to be sized similarly to the inspiration watch. We wanted the first Pramzius to be a pocket watch for the wrist, and a quite specific one at that.

The original pocket watch maintained popularity throughout its run and was really just a cool piece. The simple dial and that amazing relief image of the train on the back made the watch a must-have for collectors of Russian timepieces as well as devotees to pocket watches. We actually sold the original watch in North America for many years before the company that built them folded, and it was always one of our co-founder’s personal favorites. He has several in his private collection.

Despite our love of the original, we knew the blue steel pointer replica Pramzius Trans-Siberian would have to incorporate critical updates from the inspiration piece for today’s watch consumer demands. The case, crystal and crown, among other things, are all significantly improved. The original was plated brass, and the Pramzius is all surgical-grade stainless steel.

We also know that watch owners really enjoy multiple strap options these days, so we are having three made for the white dial fake Pramzius Trans-Siberian – a bund or lagarto style, a nylon Zulu style, and a more traditional wide-grain leather version that still has the screw-in system for security. The base model automatically comes with two straps, with the third as an optional upgrade. And for those who love the piece but perhaps don’t see themselves wearing it, we are offering an optional cherry wood veneer stand made right here in Connecticut that can convert the Trans-Siberian into a desk clock.

For the engine, instead of a pocket-watch movement with a sub-dial second hand, we went with the NH38 open heart movement built by SII, so that the open heart displays where the sub seconds would normally appear. We wanted the quality that comes from fake Seiko but we also wanted to have the configuration speak to the pocket watch legacy. The open heart accomplishes both and puts a new twist on the whole theme.

With all that said, for us, the case back is as important to the watch’s identity as anything else. We insisted the case back feature the large, 3D rendering of the original train that appeared on the inspiration watch. That was really what made the original such a sought after piece. The acrylic crystal on the inspiration watch is upgraded to a K1 mineral (or optional sapphire) crystal. The watch is also a numbered, limited edition of only 999 per dial while the original was a continuous production. Nobody actually knows how many were ever produced.

The inspiration watch also had new luminous material, which is not that uncommon for pocket watches. So, that was another change we knew we would be making. We are lume nuts. We won’t personally wear watches that don’t have excellent lume and there was no way we were going to produce timepieces that didn’t rock great luminous material.

This is a watch for those who love bright, highly visible lume. The Super-Luminova on the brown leather strap fake Pramzius lights up the night and splits the dark. The full-lume dial on the white model is, of course, a stand out. However the lume on the blue and black dials is also excellent, with the black sporting the coveted blue color lume. The lume on the full lume dial is C3, which is the brightest offered by Super-Luminova. The black and blue use one of the newest compounds, BGW09, which allows for the wider variety of color options. Something of note: we apply 15 to 20 coats of lume (well beyond any industry standard) and we silk screen between layers to provide the maximum illumination from the bottom layer all the way to the top.

Even though this is not a dive watch, we at replica Pramzius insisted on 10 ATM water resistance. Our goal was not to simply recreate the original pocket watch and put it on a strap. We wanted to create something new that is true to the inspiration but also a solid upgrade in material and workmanship. If you are a fan of big watches with stand out lume and are looking for something that won’t look like what is on everyone’s wrist, the Pramzius Tran-Siberian is definitely for you.